Acoustical wall panels shall be Type as manufactured by Panel Solutions, 100 East Diamond Avenue, Hazleton, PA 18201, Telephone 1-800-523-6671. Factory Rep.: WIUSA.com, P. O. Box 571249, Dallas, TX 75357, USA 800-527-9014, Fax 214-327-4101.
Prefinished, factory assembled PSI Panels shall consist of a_____________ inch, _____________pound density fiberglass core. All core edges shall be reinforced by either an eighteen (18) gauge aluminum frame or a specifically formulated resin edge hardener which shall be impregnated to a minimum depth of 1/8".
Panel components shall have Class "A" Flame Spread ratings of 25 or less as determined by ASTM-E-84 Tunnel Test.
Panels shall have a minimum NRC Rating of _______________when tested in accordance with ASTM-C-423-81, based on test mounting "A".
In addition, photocopies of test results from an accredited testing laboratory shall be submitted to the specifier/owner to substantiate that the sound reduction frequencies conform to the criteria as outlined in this specification.
The covering specified shall be pattern __________________ colorway ________________ . The fabric and/or #5A perforated vinyl wallcovering shall be either bonded directly to the panel surface or stretched, wrapped and adhered to the sides and back of the panel, assuring an aesthetically pleasing surface finish.
PANEL SIZESMaximum width 4 ft. in vinyl and 5 ft. in fabric by a maximum of 10 ft. in height. PS-80-AL and PS-80-ALD panels are available in longer lengths. Standard core thicknesses are 1/2", 1", 1-1/8", 2" and 2-1/8". Cutting tolerances are +\- 1/8".
EDGE DETAILSquare, beveled and radius edges are standard in either our aluminum or resin hardened finish edges. Please contact us for custom edge requirements.
FIRE RATINGSPanel component parts shall have Class "A" Flame Spread ratings of 25 or less as determined by the ASTM-E-84 Tunnel Test.
C.O.M.To meet your C.O.M. requirements, please submit a one linear yard sample of the material of your choice so that we may determine if it is compatible with the panel(s) you have selected. A sample panel will be submitted for your approval prior to manufacture.
TECHNICAL SUPPORTThe in-house Architectural Services of PSI welcome your requests for any technical expertise and guidance that you may require.
INSTALLATIONDepending upon the intended mounting method, panels are supplied with either mechanical fasteners (Z-clips) or hook and loop tape and leveling angles. Detailed instructions accompany each shipment to assure proper installation. The appropriate hardware as determined most suitable by the manufacturer shall be mounted to the back of the panel unless otherwise selected by the specifier.
The manufacturer shall submit sample panel(s) in the specified fabric or vinyl wallcovering, illustrating the edge detail and thickness specified, through either the contractor or the WIUSA.com sales representative. Manufacturing of panels will not commence without written approval by the specifier. Shop drawings should also accompany the approved submittal.
SHIPMENTTo avoid damage in transit, panels must be packaged in 275 lb. test double wall corrugated cardboard carton, total weight not to exceed 150 pounds.
INSTALLATIONThe contractor shall furnish all labor, materials, services and equipment necessary for, and reasonably incidental to, the installation of the Panel Solutions products as shown on drawings and as specified herein.
WARRANTYAll panel and baffle materials provided and installed within the manufacturer's standards for installation shall be warranted for a period of one (1) year from the date of sale against defects to material or specified performance.
AVAILABILITY AND COSTOur professional sales force is readily available to assist you with delivery and pricing information. Please contact WIUSA.com at USA 800-527-9014, fax at 214-327-4101, or e-mail: firstname.lastname@example.org.