curvwood-veneer2

CurvTambour generically know as Tambour, offers the Architectural & Design community the Design Freedom to provide both flexibility and create spectacular accents for walls, columns and wainscoting. Tambour can preserve the architectural style and design integrity, or allow the designer to create outstanding design concepts. Our array of Tambour profiles, materials and field finish choices will enhance any architectural surfaces.

Our Decorative Tambour has been selected for multiple uses such as, above chair-rail wall covering, short wainscot function, cabinet shops incorporation in store fixtures, and woodworker’s applications in specialty use decorative products, such as tambour doors in solid wood or veneer, among others.

The Curvwood CurvTambour Collection of Decorative Tambour is designed primarily for commercial use. However, due to our high quality and popular selection of profiles, colors and materials, it is often specified for luxury hospitality applications. From a building lobby, or boardroom, or accent wall to a beach house wainscot, New England cottage, or historical restoration – TAMBOUR IS IT !

Our Decorative Tambour is manufactured in a variety of profiles in Solid Wood and Wood Veneer, Unfinished for ready to finish projects. Hardwoods include Red Oak, Maple, Cherry, Popular – as standard, and Walnut and White Oak as custom species. Using colorful designs in laminates from WilsonArt and Formica brands, we can create for your project laminate Tambour in hundreds of colors and textures as ideal accent wall covering, wainscot and columns.

CurvTambour offers total Design Freedom. Tambour can be used both Vertical and Horizontal by mixing surface areas of application with Solid Wood panels, Wood Veneer panels and panels of your Laminate color choice, and Paint Grade Tambour panels either flat or gloss, or custom tambour panels installed in different areas with Profiles, Finishes and Colors to offer a Signature Effect.

Note: Our Solid Wood tambour is manufactured with a Clothbacking. Wood Veneer tambour is manufactured with a heavy duty Paperbacking for the many varied applications, from cabined shop use to multi interior design styles and profile finishes . Equally popular is Clothbacked Tambour used for sliding Doors and Roll Top Desks applications. We also offer Solid-Like Wood Tambour Doors, as custom production.

Available CurvTambour:

• Solid Wood
• Wood Veneer
• Paint Grade Solid Wood
• Paint Grade Hardboard
• High Pressure Decorative Laminate
• Paperbacked Veneer CurvTambour
• Clothbacked Tambour Roll Top Doors Solid Wood with Leadrails
• Clothbacked Tambour Roll Top Veneer Doors
• Sliding Doors with Solid Look

Tambour Application – Examples

• Columns& Poles wrapped in Tambour of either solid wood, wood veneer, laminate.
• Wall covering for curved or flat walls or surfaces.
• Chair Rails in offices, hallways and executive office base trim..
• Wainscot in offices, hospitality, beach houses.
• Woodworker application across or around receptionist desk or bank fixture counters.
• Interior mall storefront facades and Retro-Deco curved ceiling applications.
• Restaurant design and dining room applications.
• Historical restorations and ceilings.


WE would appreciate the opportunity to be of service on your project!

CurvTambour offers Design Freedom in WOODwork.

SOLID WOOD – Tambour Panels
Red Oak – Maple – Cherry – Poplar

• CurvTambour solid hardwood slat moldings bonded to flexible cloth backer.
• Ready-to-finish, for architectural applications, wall covering, wainscoting or custom millwork projects.
• 4 Profiles – Half-Round, Wedge, Flat, Pencil.
• Decorative Tambour designed for climate controlled interior finish, ONLY.
• Profile applications for walls, bar & counter faces, reception areas, columns, lobby areas, commercial accents, interior store areas, performing arts facilities, and hospitality.
• Mfg. Tolerance +/- 1/8” L & W.

Standard Solid Wood: Red Oak – Maple – Cherry – Poplar;    Custom: White Oak – Walnut

Slat
Length
SL
Nominal
Panel
Width
Product
Code
Style
Nominal
Thickness
Slat
Width
Groove
Degree
Profile
Click on image for Larger image
95”12”CTSW15
Half-Round
Specify Wood
5/16”3/4”N/A
95”12”CTSW42
Wedge
Specify Wood
5/16”3/4”60
95”12”CTSW30
Flat
Specify Wood
3/16”3/4”60

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for solid wood varies by specie, quantity required, season of year, usually about 4-6 weeks – Please Inquire with your exact info for current estimate.

Ordering Information:

• Inquire for Price quote with Product number, wood specie, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Solid Wood Tambour Information

• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, except Pencilcane.
• ALL Solid Wood Tambour is manufactured using random slat layup. This means there is NO wood grain or color matching of slats. Each slat is individually milled per profile, and then attached to cloth backer. This means, 2 or 3 slats may look the same, then 1 or 2 next are different in either or both color and grain. Random layup means just that slats vary across the sheet width, this offers a NATURAL appearance. Book match or side match does NOT exist in solid wood tambour.
• Tambour panels can be cut down by installer when shorter heights are required, as there is no sequence in the panels. Use caution to clamp front & back of panel, with straight edge front & back along cut line, before cutting. Requires plan & experience.
• Solid wood Tambour is not fire rated. You can apply a field fire retardant clear finish.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
• Tambour can be installed either Vertical or Horizontal. Our CurvTambour works great as either vertical wall covering, counter or bar fronts, columns. CurvTambour looks great also installed horizontal as chair rails, low traffic floor base trim, 45 degree angle for accents and decorative statements. Think Design Freedom
• When a wood specie is required, but NOT offered,( like Walnut or Mahogany or White Oak ) due to cost or wood availability, consider a wood stain to match as close to desired specie color. Remember, people are usually 2 – 4 feet away from a wall or surface, or the area is not brightly lighted, and most folks do NOT walk around with a magnifying glass, and most do not know one wood from another, except that it is a light or dark color wood. SAVE MONEY for Your Customer & STAIN IT.,.. ( Make sure you explain it FIRST ! ). EXCEPT – Poplar – recommend be Painted.
Production orders are Non-Cancelable. Remember to order accurately.

WOOD VENEER – Tambour Panels
Red Oak – Maple – Cherry – Red Birch – Walnut

• CurvTambour Wood Veneer bonded to medium density fiberboard or hardboard, bonded to a flexible Paper backer.
• Ready-to-finish, for architectural applications, wall covering, wainscoting or custom millwork projects.
• 2 Profiles – 1/2” Flat and 3/4” Flat slats, in panels nominal 48” wide x 96” SL, Unfinished for field finish in either a Clear or Stain.
• Decorative Tambour designed for climate controlled interior finish, ONLY.
• Profile applications for walls, bar & counter faces, reception areas, columns, lobby areas, commercial accents, interior store areas, performing arts facilities.
• Mfg. Tolerance +/- 1/8” L & W.

Standard Species: Red Oak – Maple – Cherry – Red Birch – Walnut; Other Species Inquire, minimum qty required.

Slat
Length
SL
Nominal
Panel
Width
Product
Code
Style
Nominal
Thickness
Slat
Width
Groove
Degree
Profile
Click on image for Larger image
96”48”801
Flat
Specify Wood
3/16”1/2”30
96”48”802
Flat
Specify Wood
3/16”3/4”30

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for Wood Veneer varies by specie , quantity required, season of year, usually about 3-4 weeks – Please Inquire with your exact info for current production estimate.

Ordering Information:

• Inquire for Price quote with Product number, wood specie, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Wood Veneer Tambour Information

• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, for Wood Veneer.
• ALL Wood Veneer Tambour is manufactured resulting in random slat layup appearance. Random layup means the slats appearance vary across the sheet width, this offers a NATURAL appearance. Wood veneer tambour is started with a 4×8 sheet of veneer bonded to a 4×8 sheet of light color fiberboard, then grooved to 30 degree resulting in a 1/2” or 3/4” slat width, and bonded to a flexible backer. Due to the space between ready-to-finish slats, the now wood veneer panel may look like it consists of individual random slats. Book match or side match Wood Veneer panels does NOT exist in tambour.
• Tambour panels can be cut down by installer when shorter heights are required, as there is no sequence in the panels. Use caution to clamp front & back of panel, with straight edge front & back along cut line, before cutting. Requires plan & experience.
• Wood Veneer Tambour is not fire rated. Contractor can apply a field fire retardant clear finish.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
• Tambour can be installed either Vertical or Horizontal. Our CurvTambour works great as either Vertical wall covering, counter or bar fronts, columns, and more.
CurvTambour looks great also installed Horizontal as chair rails, low traffic floor base trim, 45 degree angle for accents and decorative statements. Think Design Freedom
• When a wood specie is required, but NOT offered,( like Mahogany or White Oak ) due to cost or wood availability, consider a wood stain to match as close to desired specie color. Remember, people are usually at least 2 -4 feet away from a wall or surface, or the area is not brightly lighted, and most folks do NOT walk around with a magnifying glass, and most people do not know one wood from another, except that it is a light or dark color wood. SAVE MONEY for Your Customer & STAIN IT…..
( Make sure you explain it FIRST ! ).
• Production orders are Non-Cancelable. Remember to order accurately.

Paint Grade Solid Wood – Tambour Panels in POPLAR

• CurvTambour solid wood Poplar bonded to flexible cloth backing.
• Ready-to-finish Poplar solid wood, for architectural applications, wall covering, wainscoting, columns or custom millwork projects.
• Ready-to-finish means, the wood profile has been mill sanded once, and is now ready for any additional sanding, cleaning, paint or final finishing steps as required.
• Profile – 3/4” Half-Round,
• Decorative Tambour designed for climate controlled interior finish, ONLY.
• Other woods and profiles available for Painting – Inquire.
• Mfg. Tolerance +/- 1/8” L & W.

Slat
Length
SL
Nominal
Panel
Width
Product
Code
Style
Nominal
Thickness
Slat
Width
Groove
Degree
Profile
Click on image for Larger image
95”12”CTS-110
Half-Round
5/16”3/4”N/A

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for Poplar solid wood varies by, quantity required, season of year, usually about 3-4 weeks – Please Inquire with your exact info for current production estimate.

Ordering Information:

• Inquire for Price quote with Product number, wood specie, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Paint Grade Poplar Solid Wood Tambour Information

• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, for most tambour.
• Tambour panels can be cut down by installer when shorter heights are required, as there is no sequence in the panels. Use caution to clamp front & back of panel, with straight edge front & back along cut line, before cutting. Requires plan & experience.
• Tambour is not fire rated. Contractor can apply a field fire retardant clear finish.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
• Tambour can be installed either Vertical or Horizontal. Our CurvTambour works great as either Vertical wall covering, counter or bar fronts, columns, and more. CurvTambour looks great also installed Horizontal as chair rails, low traffic floor base trim, 45 degree angle for accents and decorative statements. Think Design Freedom
Production orders are Non-Cancelable. Remember to order accurately.

Paint Grade Hardboard – Tambour Panels

• CurvTambour Hardboard grooved panels bonded to flexible backing.
• Ready-to-finish Paint Grade Hardboard, for architectural applications, wall covering, wainscoting, columns or custom millwork projects.
• Ready-to-finish means, the brown hardboard panels with a grooved profile has been mill sanded once, and is now ready for contractor to do any additional sanding, cleaning, paint or final finishing steps as required.
• 2 Profile choices – 1/2” Flat slat or 3/4” Flat slat.,
• Decorative Tambour designed for climate controlled interior finish, ONLY.
• Other woods and profiles available for Painting – Inquire.
• Mfg. Tolerance +/- 1/8” L & W.

Slat
Length
SL
Nominal
Panel
Width
Product
Code
Style
Nominal
Thickness
Slat
Width
Groove
Degree
Profile
Click on image for Larger image
95.5” - 96”47” -48”CTP-111
Style 801
Flat
1/8”1/2”30
95.5” - 96”47” -48”CTP-111
Style 802
Flat
1/8”3/4”30

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for Paint Grade Hardboard varies by, quantity required, season of year, usually about 3-4 weeks – Please Inquire with your exact info for current production estimate.

Ordering Information:

• Inquire for Price quote with Product number, wood specie, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Paint Grade Hardboard Tambour Information

• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, for most tambour.
• Tambour panels can be cut down by installer when shorter heights are required, as there is no sequence in the panels. Use caution to clamp front & back of panel, with straight edge front & back along cut line, before cutting. Requires plan & experience.
• Tambour is not fire rated. Contractor can apply a field fire retardant clear finish.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
Production orders are Non-Cancelable. Remember to order accurately.

Decorative Laminate – Tambour Panels

• Vertical surface high pressure decorative laminate bonded to hardboard, grooved, then bonded to flexible backer, and grooves painted black.
• Laminates supplied by WilsonArt Laminates, custom prices per your specified color, normally 2 sheet minimum – Inquire. For Other major domestic laminate – Inquire
• Decorative Laminate Tambour panels ready for architectural applications, wall covering, wainscoting, columns or custom millwork projects.
• Ready-to-finish means, the laminate panels with a grooved profile has been completed and is now ready for contractor to do any final cleaning of any black overspray cleaning and or any final finishing steps as required for installation.
• 2 Profile choices – 1/2” Flat slat or 3/4” Flat slat.,
• Decorative Tambour designed for climate controlled interior finish, ONLY.
• Solid Wood and Wood Veneer, Paint Grade and Hardboard Tambour and profiles available for unique applications. – Inquire.
• Mfg. Tolerance +/- 1/8” L & W.

Slat
Length
SL
Nominal
Panel
Width
Product
Code
Style
Nominal
Thickness
Slat
Width
Groove
Degree
Profile
Click on image for Larger image
96”48”CTHPL
801
Flat
3/16”1/2”30
96”48”CTHPL
802
Flat
3/16”3/4”30

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for Decorative Laminate varies by, quantity required, season of year, usually about 3-4 weeks – Please Inquire with your exact info for current production estimate.

Ordering Information:

• Inquire for Price quote with Product number, laminate info, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Decorative Laminate – Custom Tambour Information
• You MUST give complete Laminate details, factory, pattern #, color #, a minimum of 2 panels is required. Noncancelable & Nonreturnable.
• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, for most tambour.
• The factory mfg. the laminate tambour panels – any additional modifications are your responsibility.
• Tambour is not fire rated.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
Production orders are Non-Cancelable. Remember to order accurately.

Cloth-backed Wood VENEER – Tambour Panels
Red Oak – Maple – Cherry – Hickory

• CurvTambour wood veneer bonded to medium density fiberboard or hardboard, bonded to a flexible Cloth style backer for stability.
• Ready-to-finish, light brown core 7/32” thickness, overall slat thickness nominal 3/16”. for architectural applications, wall covering, wainscoting or custom millwork projects.
• Profile – 1/2” Flat slats, in panels nominal 48” wide x 96” SL
• Unfinished for field finish in either a Clear or Stain.
• Decorative Tambour designed for climate controlled interior finish, ONLY.
• Profile applications for walls, bar & counter faces, reception areas, columns, lobby areas, commercial accents, interior store areas, performing arts facilities.
• Mfg. Tolerance +/- 1/8” L & W.

Available Unfinished Cloth-backed Tambour Wood Veneer

Slat
Length
SL
Nominal
Panel
Width
Product
Code
Style
Nominal
Thickness
Slat
Width
Groove
Degree
Profile
Click on image for Larger image
96”48”TO2200UF2
Red Oak
Flat
7/32”1/2”30
96”48”TO220MUF2
Maple
Flat
7/32”1/2”30
96”48”TO220HUF2
Hickory
Flat
7/32”1/2”30
96”48”TO220CUF2
Cherry
Flat
7/32”1/2”30

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for Cloth-backed Wood Veneer varies by specie , quantity required, season of year, usually about 3 weeks – Please Inquire with your exact info for current production estimate.

Ordering Information:

• Inquire for Price quote with Product number, wood species, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Clothbacked Wood Veneer Tambour Information

• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, for Wood Veneer.
• ALL Cloth-backed Wood Veneer Tambour is manufactured resulting in random slat layup appearance. Random layup means the slats appearance vary across the sheet width, this offers a NATURAL appearance. Cloth-backed wood veneer tambour is started with a 4×8 sheet of veneer bonded to a 4×8 sheet of light brown color fiberboard, then grooved to 30 degree resulting in a nominal 1/2” or 3/4” slat width, and bonded to a flexible Cloth-backer. Due to the space between ready-to-finish slats, the now wood veneer panel may look like it consists of individual random slats. Book match or side match Wood Veneer panels does NOT exist in tambour.
• Tambour panels can be cut down by installer when shorter heights are required, as there is no sequence in the panels. Use caution to clamp front & back of panel, with straight edge front & back along cut line, before cutting. Requires plan & experience.
• Cloth-backed Wood Veneer Tambour is not fire rated. Contractor can apply a field fire retardant clear finish.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
• Tambour can be installed either Vertical or Horizontal. Our CurvTambour works great as either Vertical wall covering, counter or bar fronts, columns, and more. CurvTambour looks great also installed Horizontal as chair rails, low traffic floor base trim, 45 degree angle for accents and decorative statements. Think Design Freedom
• When a wood specie is required, but NOT offered,( like Mahogany or White Oak or Walnut ) due to cost or wood availability, consider a wood stain to match as close to desired specie color. Remember, people are usually at least 2 -4 feet away from a wall or surface, or the area is not brightly lighted, and most folks do NOT walk around with a magnifying glass, and most people do not know one wood from another, except that it is a light or dark color wood. SAVE MONEY for Your Customer & STAIN IT…..  Make sure you explain it FIRST ! ).
Production orders are Non-Cancelable. Remember to order accurately.

Tambour Doors Solid Wood with 2 Leadrails
Red Oak Maple – Hickory – Cherry – Alder

• Doors have individual solid hardwood slat moldings bonded to a cloth backer.
• Sanded and ready to finish.
• Available in 5 solid wood species. Red Oak, Maple, Hickory, Cherry, Alder.
• 3 profiles in 2 different slat lengths & door widths, doors all with 2 leadrails.
• Leadrails are 1-1/2” wide x tambour thickness.
• Door choice Slat lengths are 47” or 60” x 36” widths with 2 headrails.
• Slat width is 3/4”, measured from center of groove to center of groove.
• Profile choices are Flat, Half-Round, Wedge.
• Made in USA.

Solid Wood Tambour Doors - Cloth Backed - Half-Round Profile - 2 Lead Rails

Solid
Wood
Product
Code
Door
Size
Nominal
Thickness
Slat
Width
Profile
Red OakSW-15RO-53047”SL x 36” W5/16”3/4”
Red OakSW-15RO-70160”SL x 36” W5/16”3/4”
MapleSW-15MA-51847”SL x 36” W5/16”3/4”
MapleSW-15MA-60360”SL x 36” W5/16”3/4”
HickorySW-15HI-50947”SL x 36” W5/16”3/4”
HickorySW-15HI-60260”SL x 36” W5/16”3/4”
CherrySW-15CH-50947”SL x 36” W5/16”3/4”
CherrySW-15CH-61060”SL x 36” W5/16”3/4”
AlderSW-15AL-50147”SL x 36” W5/16”3/4”
AlderSW-15AL-80160”SL x 36” W5/16”3/4”

Solid Wood Tambour Doors - Cloth Backed - Flat Profile - 2 Lead Rails

Solid
Wood
Product
Code
Door
Size
Nominal
Thickness
Slat
Width
Profile
Red OakSW-30RO-51347”SL x 36” W3/16”3/4”
Red OakSW-30RO-60760”SL x 36” W3/16”3/4”
MapleSW-30MA-50847”SL x 36” W3/16”3/4”
MapleSW-30MA-60160”SL x 36” W3/16”3/4”
HickorySW-30HI-50647”SL x 36” W3/16”3/4”
HickorySW-30HI-60260”SL x 36” W3/16”3/4”
CherrySW-30-CH-51447”SL x 36” W3/16”3/4”
CherrySW-30-CH-60560”SL x 36” W3/16”3/4”
AlderSW-30AL-50347”SL x 36” W3/16”3/4”
AlderSW-30AL-60160”SL x 36” W3/16”3/4”

Solid Wood Tambour Doors - Cloth Backed - Wedge Profile - 2 Lead Rails

Solid
Wood
Product
Code
Door
Size
Nominal
Thickness
Slat
Width
Profile
Red OakSW-42RO-50247”SL x 36” W5/16”3/4”
Red OakSW-42RO-60160”SL x 36” W5/16”3/4”
MapleSW-42MA-50247”SL x 36” W5/16”3/4”
MapleSW-42MA-60160”SL x 36” W5/16”3/4”
HickorySW-42HI-50247”SL x 36” W5/16”3/4”
HickorySW-42HI-60160”SL x 36” W5/16”3/4”
CherrySW-42CH-50247”SL x 36” W5/16”3/4”
CherrySW-42CH-60160”SL x 36” W5/16”3/4”
AlderSW-42AL-50247”SL x 36” W5/16”3/4”
AlderSW-42AL-60260”SL x 36” W5/16”3/4”

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for Solid Wood Tambour Doors varies by specie, quantity required, season of year, usually about 2 weeks – Please Inquire with your exact info for current production estimate.

Ordering Information:

• Inquire for Price quote with Product number, wood specie, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Solid Wood Tambour Doors Information

• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, for Wood Veneer.
• Clothbacked Solid Wood Tambour Doors are not fire rated.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
• Production orders are Non-Cancelable. Remember to order accurately.

Tambour Doors Wood Veneer with Leadrails
Red Oak – Maple – Hickory – Cherry – Alder

• Doors have individual wood veneer slat moldings bonded to medium density fiberboard with a balance veneer.
• Fiberboard core is bonded to cloth backer.
• Sanded and ready to finish.
• Available in 5 wood veneer species. Red Oak, Maple, Hickory, Cherry, Alder.
• 1/2” slat profile in 2 different slat lengths & door widths..
• Lead rails are 1-1/2” wide x tambour thickness.
• Door choice Slat lengths are 47-1/2”” by either 24” or 36” widths.
• Doors of 24” width have 1 lead rail, Doors with 36” width have 2 lead rails.
• Slat width is 1/2” measured from center of groove to center of groove.
• Profile choices are Flat, with a 30 degree groove.
• Made in USA.

Wood Veneer Tambour Doors - Cloth Backed - Flat Profile - 1 Lead Rail- 30 Degree Groove

Solid
Wood
Product
Code
Door
Size
Nominal
Thickness
Slat
Width
Profile
Click on image for Larger image
Red OakV-3-RO-50347-1/2” SL x 24” W7/32”1/2”
MapleV-3-MA-51747-1/2” SL x 24” W7/32”1/2”
HickoryV-3-HI-51047-1/2” SL x 24” W7/32”1/2”
CherryV-3-CH-51347-1/2” SL x 24” W7/32”1/2”
AlderV3-AL-50247-1/2” SL x 24” W7/32”1/2”

Wood Veneer Tambour Doors - Cloth Backed - Flat Profile - 2 Lead Rails - 30 Degree Groove

Solid
Wood
Product
Code
Door
Size
Nominal
Thickness
Slat
Width
Profile
Click on image for Larger image
Red OakV-3-RO-50247-1/2” SL x 36” W & 2 LR7/32”1/2”
MapleV-3-MA-50147-1/2” SL x 36” W & 2 LR7/32”1/2”
HickoryV-3-HI-50947-1/2” SL x 36” W & 2 LR7/32”1/2”
CherryV-3-CH-52047-1/2” SL x 36” W & 2 LR7/32”1/2”
AlderV-3-AL-50147-1/2” SL x 36” W & 2 LR7/32”1/2”

PRICE:

Email or Call for quote with project details & quantity & time line.

Mfg. Lead Time

Manufacturing lead time for Wood Veneer Tambour Doors varies by specie, quantity required, season of year, usually about 2 weeks – Please Inquire with your exact info for current production estimate.

Ordering Information:

• Inquire for Price quote with Product number, specie, quantity, time frame.

• All prices are ADD truck freight, dock to dock only, if no dock ADD for truck Lift Gate.
• All sizes are nominal.
• All prices are subject to change without notice.

IMPORTANT – Wood Veneer Tambour Doors Information

• All our Tambour is manufactured per your order , to our standards, sizes and profiles – ONLY.
• WE do not stock any Tambour – all manufacturing is to fill specific customer purchase order.
• Orders or excess tambour is not returnable. All our tambour goes thru quality control.
• Slat width is measured from center of groove to center of groove, for Wood Veneer.
• Clothbacked Wood Veneer Tambour Doors are not fire rated.
• READ factory Installation Considerations included with each order – BEFORE Starting. WE do NOT sell to the public, this is NOT a DIY product.
• Production orders are Non-Cancelable. Remember to order accurately.

General Order Information & Sample Requests – Please READ !

This is a wholesale website for professional architects, interior designers, woodworkers, and contractors. However, there is a minimum quantity or dollar amount requirement on most products. Please review Ordering Information at link below. All sales by credit card only for immediate processing. Orders paid by check may require additional time for bank processing. No personal checks. This is not a retail web site, WE do not offer products to the general public, our products require professional woodworker and/ or installation experience. Tambour is NOT a DIY product, WE are not a sample company, and any samples are only available as fall-off from past production. ALL Tambour wood profiles are shown as a drawing for each type on that product web page. Therefore a sample is NOT required to view profile. The sample of wood shown on any sample Is only a fraction of a full panel of that wood or veneer.

Samples only show profile (which can be seen on the web page) the wood specie of any samples is only a general representation of that specie.  Do NOT expect any order to match a sample, make sure your customer understands the variation in wood. As a professional you should be aware of the color and grain variation in each wood specie you plan to consider or use. When possible we try to accommodate requests, however we reserve the right to charge for samples. If a request is for several samples for stain or finish purpose, we suggest plan to purchase a full panel for that purpose.

See our Order Information page for more details about ordering.

Made in USA. ….Making walls productive.…Since 1979